Can You Plug a Router Into Another Router
Connecting multiple routers together may be necessary if you have one of the following issues:
-Your Internet provider has provided you a Modem/Router (2 in 1) and you want to connect a new router to it.
-You want to aggrandize the amount of Ethernet ports in your network (without a switch)
-You desire to extend the range of the wireless indicate in your home (by using the 2nd router as an access point)
Annotation: Practice Non Connect the routers together until these settings have been changed.
Please launch your browser and enter http://dlinkrouter.local or http://192.168.0.1 into the address bar. Then login and follow the steps below:
Stride 1: Change the IP address to 192.168.0.2. And so, click advanced settings on the bottom right, and Disable the DHCP Server.
Pace two: Connect a cable from a LAN port (1,two,3,iv) on your Primary Router to a LAN port (1,two,3,4) on your new router.
The Setup is now complete. If you lot now desire to configure the wireless settings on your "new" router, go to this address: http://192.168.0.2.
Note: NAT, defined in RFC 3022, allows a host that does not have a valid, registered, globally
unique IP address to communicate with other hosts through the Internet. The hosts might exist using private addresses or addresses assigned to another organisation. In either example, NAT allows these addresses that are not Internet-ready to continue to be used and still allows communication with hosts across the Internet.
winderseentiourcio.blogspot.com
Source: https://eu.dlink.com/uk/en/support/faq/routers/wireless-routers/dir-series/dir-878/how-do-i-connect-two-routers-together
0 Response to "Can You Plug a Router Into Another Router"
Post a Comment